Description
Use the display fiber-backup group command to display the information of the member OLT ports,
their roles and states in the specified or all fiber backup groups.
Examples
# Display the information of the member OLT ports, their roles and states in fiber backup group 1.
<Sysname> display fiber-backup group 1
fiber backup group 1 information:
Member
----------------------------------
Olt3/0/3
Olt3/0/4
Table 1-8 display fiber-backup group command output description
fiber backup group 1 information:
Member
Role
State
display onu-event interface
Syntax
display onu-event interface interface-type interface-number
View
Any view
Default Level
2: System level
Parameters
interface-type: Port type. It is ONU.
interface-number: ONU port number.
Role
State
MASTER
ACTIVE
SLAVE
READY
Field
Description
Information about fiber backup group 1
Member port information of the fiber backup group
Role of the OLT port in the backup group:
MASTER: master port
SLAVE: slave port
OLT port state:
ACTIVE: The master port is active (the chip is
active and the optical module is plugged in).
READY: The slave port is ready and a master-slave
switchover can be performed.
DOWN: Any other condition.
1-12