3Com S7906E Command Reference Manual page 170

PSE pairs control ability : No
Power pairs
Port power classification : Class 0
Link aggregation supported : Yes
Link aggregation enabled
Aggregation port ID
Maximum frame Size: 1536
Table 1-2 display lldp neighbor-information command output description
Field
LLDP neighbor-information
LLDP neighbor-information of Port number
interface-type interface number
Neighbor index
Update time
Chassis type
Chassis ID
Port ID type
Port ID
Port description
System name
System description
System capabilities supported
: Signal
: No
: 0
LLDP information about a neighboring device
LLDP information received through a specific port
Neighbor index
Time when the LLDP information about a neighboring
device is latest updated.
Chassis information, which can be:
Chassis component
Interface alias
Port component
MAC address
Network address
Interface name
Locally assigned (indicating the local configuration)
ID that identifies the LLDP sending device, which can
be a MAC address, a network address, an interface or
some other value depending on the chassis type.
Port information, which can be:
Interface alias
Port component
MAC address
Network Address
Interface name
Agent circuit ID
Locally assigned (indicating the local configuration)
Port ID, the value of which depends on the port ID type
Port description
System name of the neighboring device
System description of the neighboring device
Capabilities supported on the neighboring device,
which can be:
Bridge, indicating switching
Router, indicating routing
1-7
Description