Cfd Service-Instance - 3Com S7906E Command Reference Manual

Examples
# Configure a remote MEP.
<Sysname> system-view
[Sysname] interface GigabitEthernet 2/0/1
[Sysname-GigabitEthernet2/0/1] cfd remote-mep 9 service-instance 5 mep 3

cfd service-instance

Syntax
cfd service-instance instance-id md md-name ma ma-name
undo cfd service-instance instance-id
View
System view
Default level
2: System level
Parameters
instance-id: Service instance ID, ranging from 1 to 32767.
md md-name: Specifies the name of an MD, a string of 1 to 48 characters, composed of letters,
numbers or underlines, but cannot start with an underline character.
ma ma-name: Specifies the name of an MA, a string of 1 to 48 characters, composed of letters,
numbers or underlines, but cannot start with an underline character.
Description
Use the cfd service-instance command to create a service instance.
Use the undo cfd service-instance command to delete a service instance.
By default, no service instance is created.
Note that:
You must create MD and MA prior to creating service instance.
The service instance ID uniquely identifies an MA in an MD.
When deleting a service instance, you are deleting the configurations related to that service
instance as well.
Deleting a service instance simply breaks up the connection between the service instance and the
corresponding MA, the MA itself is not deleted.
Related commands: cfd md, cfd ma.
Examples
# Create a service instance.
<Sysname> system-view
[Sysname] cfd md test_md level 3
[Sysname] cfd ma test_ma md test_md vlan 100
[Sysname] cfd service-instance 5 md test_md ma test_ma
1-11