Display Cfd Status - 3Com S7906E Command Reference Manual

<Sysname> display cfd service-instance 7
Service instance 7:
Maintenance domain: mdtest_7
Maintenance association: matest_7
Level: 7
MEP ID: 731
Table 1-12 display cfd service-instance command output description
2 service instance(s) are configured.
Service instance 5
Maintenance domain
Maintenance association:
Level
VLAN
MIP rule
CCM interval
MEP ID
Interface
Direction

display cfd status

Syntax
display cfd status
View
Any view
Default level
2: System level
Parameters
None
Description
Use the display cfd status command to display the status of CFD (enabled or disabled).
Examples
# Display the status of CFD.
<Sysname> display cfd status
CFD is enabled.
VLAN: 7 MIP rule: None
Interface: GigabitEthernet2/0/1
Field
CCM interval: 1s
Description
Number of service instance configured.
Service instance ID
MD of the service instance
MA of the service instances
MD level
VLAN that the MA belongs to
MIP generation rules configured on service instance
Interval to send CCMs
ID of MEPs configured on the service instance
Interface of the MEP configured on the service instance
Direction of the MEPs configured on the service instance
1-22
Direction: Inbound