Manual Version - 3Com S7906E Command Reference Manual

Access Volume Organization

Manual Version

20090615-C-1.01
Product Version
Release 6300 series
Organization
The Access Volume is organized as follows:
Features
Ethernet Interface
Link Aggregation
Port Isolation
Service Loopback
Group
This document introduces the commands for:
Combo Port Configuration
Basic Ethernet Interface Configuration
Configuring Flow Control on an Ethernet Interface
Configuring the Suppression Time of Physical-Link-State Change on
an Ethernet Interface
Configuring Loopback Testing on an Ethernet Interface
Configuring a Port Group
Configuring an Auto-negotiation Transmission Rate
Configuring Storm Suppression
Setting the Interval for Collecting Ethernet Interface Statistics
Enabling Forwarding of Jumbo Frames
Enabling Loopback Detection on an Ethernet Interface
Configuring the MDI Mode for an Ethernet Interface
Testing the Cable on an Ethernet Interface
Configuring the Storm Constrain Function on an Ethernet Interface
Link aggregation aggregates multiple physical Ethernet ports into one
logical link. This document introduces the commands for:
Configuring a Static Aggregation Group
Configuring a Dynamic Aggregation Group
Configuring an Aggregate Interface
The port isolation feature allows you to isolate different ports within the
same VLAN. This document introduces the commands for the isolation
group configuration.
To increase service redirecting throughput, you can bundle multiple
service loopback ports into a logical link, called a service loopback group.
This document introduces the commands for the service loopback group
configuration.
Description