Display Protocol-Vlan Vlan - 3Com S7906E Command Reference Manual

Table 1-5 display protocol-vlan interface command output description
Interface
VLAN ID
Protocol Index
Protocol Type

display protocol-vlan vlan

Syntax
display protocol-vlan vlan { vlan-id1 [ to vlan-id2 ] | all }
View
Any view
Default Level
2: System level
Parameters
vlan-id1: ID of the protocol-based VLAN for which information is to be displayed, in the range of 1 to
4094.
vlan-id1 to vlan-id2: Displays protocol-based VLAN information of a VLAN range from vlan-id1 to
vlan-id2. The vlan-id2 argument specifies a protocol-based VLAN ID in the range of 1 to 4094, but you
must ensure that its value is greater than or equal to that of vlan-id1.
all: Displays information about all protocol-based VLANs.
Description
Use the display protocol-vlan vlan command to display the protocols and protocol indexes configured
on the specified VLAN(s).
Related commands: display vlan.
Examples
# Display the protocols and protocol indexes configured on all protocol-based-VLANs.
<Sysname> display protocol-vlan vlan all
VLAN ID:2
Protocol Index
======================================================
0
3
VLAN ID:3
Protocol Index
======================================================
0
1
Field
Interface of which you want to view the information
ID of the protocol-based VLAN bound with the port
Protocol template index
Protocol type specified by the protocol template
Protocol Type
ipv4
ipx ethernetii
Protocol Type
ipv4
ipx snap
Description
1-23