Oam Errored-Frame-Period Period; Oam Errored-Frame-Period Threshold - 3Com S7906E Command Reference Manual

[Sysname] oam errored-frame threshold 100

oam errored-frame-period period

Syntax
oam errored-frame-period period period-value
undo oam errored-frame-period period
View
System view
Default Level
2: System level
Parameters
period-value: Errored frame period detection interval, ranging from 100 to 60,000 (in milliseconds).
Description
Use the oam errored-frame-period period command to set the errored frame period detection
interval.
Use the undo oam errored-frame-period period command to restore the default.
By default, the errored frame period detection interval is 1000 milliseconds.
As for errored frame period event detection, the system first uses the following expression to convert
the errored frame period detection interval to the maximum number of 64-byte frames that can be
transmitted through an Ethernet port in the period:
where bandwidth is the port bandwidth (in bps) and "period" is the configured period (in milliseconds).
A errored frame period event occurs when a errored frame period detection interval expires and the
number of the frame errors occurred on an Ethernet port is larger than (or equal to) the errored frame
period event triggering threshold.
The errored frame period detection interval configured applies to all the Ethernet ports on which OAM
connections are established.
Related commands: oam errored-frame-period threshold, display oam link-event, display oam
configuration.
Examples
# Set the errored frame period detection interval to 10 seconds.
<Sysname> system-view
[Sysname] oam errored-frame-period period 10000

oam errored-frame-period threshold

Syntax
oam errored-frame-period threshold threshold-value
undo oam errored-frame-period threshold
bandwidth * period / (64 * 8 * 1000),
1-12