Display Link-Aggregation Verbose - 3Com S7906E Command Reference Manual

Partner ID
Select Ports
Unselect Ports
Share Type

display link-aggregation verbose

Syntax
display link-aggregation verbose [ bridge-aggregation [ interface-number ] ]
View
Any view
Default Level
1: Monitor level
Parameters
bridge-aggregation: Displays detailed information about the Layer-2 aggregate groups corresponding
to Layer-2 aggregate interfaces.
interface-number: Aggregate interface number. The value range is 1 to 1,024. Note that the aggregate
interface you specify must already exist.
Description
Use the display link-aggregation verbose command to display detailed information about the
aggregation groups corresponding to the aggregate interfaces.
To display the information of a specific Layer-2 aggregate group, use the display link-aggregation
verbose bridge-aggregation
bridge-aggregation interface-number command.
To display the information of all Layer-2 aggregate groups, use the display link-aggregation verbose
bridge-aggregation or display link-aggregation verbose route-aggregation command.
To display the information of all aggregate groups, use the display link-aggregation verbose
command.
Examples
# Display the detailed information of the aggregation group corresponding to Layer-2 aggregate
interface Bridge-aggregation 10.
<Sysname> display link-aggregation verbose bridge-aggregation 10
Loadsharing Type: Shar -- Loadsharing, NonS -- Non-Loadsharing
Port Status: S -- Selected,
Flags: A -- LACP_Activity, B -- LACP_Timeout, C -- Aggregation,
D -- Synchronization, E -- Collecting, F -- Distributing,
Field
interface-number
U -- Unselected
1-6
Description
System ID of the partner
The number of selected ports
The number of unselected ports
Load sharing type
or display link-aggregation verbose