Uni Vlan-Mode Tag Pvid - 3Com S7906E Command Reference Manual

This command takes effect on H3C ONUs only.
Examples
Specify the speed for UNI 1 to 10 Mbps.
<Sysname> system-view
[Sysname] interface onu 3/0/1:1
[Sysname-Onu3/0/1:1] uni 1 speed 10

uni vlan-mode tag pvid

Syntax
uni uni-number vlan-mode tag pvid pvid [ priority priority-value ]
undo uni uni-number vlan-mode
View
ONU port view
Default Level
2: System level
Parameters
uni-number: UNI number, in the range 1 to the number of current ONU UNIs. The maximum number of
UNI ports supported is 80.
Value: 802.1p precedence value of a packet, in the range of 0 to 7.
pvid: Default VLAN ID, in the range 1 to 4094.
Description
Use the uni vlan-mode tag pvid command to configure the VLAN operation mode of the specified UNI
as the VLAN tag mode and set the related parameters.
Use the undo uni vlan-mode command to restore the default VLAN operation mode of the UNI.
By default, the VLAN operation mode of a UNI is VLAN transparent transmission mode.
Related command: uni vlan-mode translation pvid, uni vlan-mode transparent.
2-38