Mirroring-Group Mirroring-Port - 3Com S7906E Command Reference Manual

Use the group-id argument to specify the port mirroring group to be removed.
Use the all keyword to remove all the port mirroring groups.
Use the local keyword to remove all the local port mirroring groups.
Use the remote-destination keyword to remove all the remote destination port mirroring groups.
Use the remote-source keyword to remove all the remote source mirroring groups.
Examples
# Create a local port mirroring group numbered 1.
<Sysname> system-view
[Sysname] mirroring-group 1 local
# Create remote destination mirroring group numbered 2.
<Sysname> system-view
[Sysname] mirroring-group 2 remote-destination

mirroring-group mirroring-port

Syntax
mirroring-group group-id mirroring-port mirroring-port-list { both | inbound | outbound }
undo mirroring-group group-id mirroring-port mirroring-port-list { both | inbound | outbound }
View
System view
Default Level
2: System level
Parameters
group-id: Port mirroring group number, in the range of 1 to 4.
mirroring-port-list: List of ports to be added to the port mirroring group. You can specify multiple ports by
providing this argument in the form of { interface-type interface-number [ to interface-type
interface-number ] }&<1-8>, where the interface-type argument is port type, the interface-number
argument is the port number, and &<1-8> means that you can provide up to eight port indexes/port
index lists for this argument.
both: Specifies to duplicate both inbound and outbound packets.
inbound: Specifies to duplicate inbound packets only.
outbound: Specifies to duplicate outbound packets only.
Description
Use the mirroring-group mirroring-port command to configure source ports for a port mirroring
group.
Use the undo mirroring-group mirroring-port command to remove source ports from a port mirroring
group.
Note that:
The source port cannot be a member port of the current mirroring group.
A remote destination mirroring group cannot contain source mirroring ports.
1-3