Display Cfd Linktrace-Reply Auto-Detection - 3Com S7906E Command Reference Manual

Field
Relay Action

display cfd linktrace-reply auto-detection

Syntax
display cfd linktrace-reply auto-detection [ size size-value ]
View
Any view
Default level
2: System level
Parameters
size size-value: Specifies the times of recent auto-detections, ranging from 1 to 100.
Description
Use the display cfd linktrace-reply auto-detection command to display the content of the LTR
messages received as responses to the automatically sent LTMs.
These LTR messages are stored in the buffer after you executed the cfd linktrace auto-detection
command. With the size parameter not specified, this command will display the information of all LTRs
stored in the buffer.
Examples
# Display the content of the LTRs received as responses to the LTMs sent.
<Sysname> display cfd linktrace-reply auto-detection
Service instance: 1
Target MEP ID: 2005
MAC Address
00E0-FC27-6502
00E0-FC00-6510
00E0-FC52-BAA0
Service instance: 2
Target MEP ID: 2025
MAC Address
00E0-FC27-6502
Found: Indicates that the forwarding device found the destination MAC
address in its MAC address table.
Unknown: Indicates that the forwarding device failed to find the
destination MAC address in its MAC address table.
None: Indicates that it is a MEP that responded to the LTM message. A
MEP does not need to find the destination MAC address.
MEP ID: 1003 Time: 2006/05/22 10:43:57
TTL: 255
TTL Forwarded
63 Yes
62 Yes
61 No
MEP ID: 1023 Time: 2006/05/22 10:44:06
TTL: 255
TTL Forwarded
63 No
1-13
Description
Relay Action
Found
Found
None
Relay Action
None