Display Gvrp State; Display Gvrp Statistics - 3Com S7906E Command Reference Manual

Description
Use the display gvrp local-vlan interface command to display the local VLAN information maintained
by GVRP on the specified port.
Examples
# Display the local VLAN information maintained by GVRP on GigabitEthernet 2/0/1.
<Sysname> display gvrp local-vlan interface GigabitEthernet 2/0/1
Following VLANs exist in GVRP local database:
1(default),2-500
// The information above shows that GVRP maintains the information about VLAN 1, VLAN 2 through
VLAN 500, which GigabitEthernet 2/0/1 belongs to.

display gvrp state

Syntax
display gvrp state interface interface-type interface-number vlan vlan-id
View
Any view
Default Level
0: Visit level
Parameters
interface interface-type interface-number: Specifies an interface by its type and number.
vlan vlan-id: Specifies a VLAN ID, in the range of 1 to 4094.
Description
Use the display gvrp state command to display the current GVRP state.
Examples
# Display the GVRP state of VLAN 1, which GigabitEthernet 2/0/1 belongs to.
<Sysname> display gvrp state interface GigabitEthernet 2/0/1 vlan 1
GVRP state of VLAN 1 on port GigabitEthernet2/0/1

display gvrp statistics

Syntax
display gvrp statistics [ interface interface-list ]
View
Any view
Applicant state machine
Registrar state machine
: VP
: MTR
1-6