Display Rmon Event - 3Com 7750 Series Command Reference Manual

3Com Switch 7750 Series
Command Reference Guide – SNMP & RMON
Samples type
Variable formula
Sampling interval
Rising threshold is 100
Falling threshold is 10
When startup enables
Latest value

2.1.2 display rmon event

Syntax
display rmon event [event-entry ]
View
Any view
Parameter
event-entry: Event entry index, in the range of 1 to 65535. If you do not specify this
argument, the configuration of all the event entries is displayed.
Description
Use the display rmon event command to display the configuration of a specified event
entry or all the event entries.
The displayed information includes: event entry index, event entry owner, event
description, the action triggered by the event (log or alarm messages), and the time (in
seconds) when the latest event is triggered (in terms of the time elapsed since the
system is started/initialized).
Related command: rmon event.
Example
# Display the configuration of all the event entries.
<3Com> display rmon event
Field
Sample type: change value or absolute value
Variable formula of the sampled node
Sampling interval
Rising threshold is 100
Falling threshold is 10
Alarm startup type:
risingOrFallingAlarm (an alarm is triggered when the
rising or falling threshold is reached)
risingAlarm (an alarm is triggered when the rising
threshold is reached)
FallingAlarm (an alarm is triggered when the falling
threshold is reached)
Latest sampled value
Chapter 2 RMON Configuration Commands
Description
2-2