Display Lecs Status - 3Com CoreBuilder 7000 Management Manual

Display LECS Status

Displays the status of the LECS in the CoreBuilder 7000 family ATM
switch. The status is either enabled or disabled.
Command Actions
Enter menu sequence:
Direct access sequence:
Command Result
System action taken:
System message display:
Example
Enter:
1 1 5 2 1
The following message is displayed:
LECS service status is ENABLED.
LAN Emulation Services Setup
(1) SYS: Platform Configuration
(1) SET: Switch Setup
(5) SLE: LE Setup
(2) LCS: LECS setup
(1) STA: Show LECS status
1 1 5 2 1
The LECS status is displayed.
LECS service status is ENABLED.
257