66
C
4: P
HAPTER
ORT
display port status
C
OMMANDS
Examples — The following command displays the preference settings on
all four ports of a WX4400 switch:
WX4400# display port preference
Port
Preference
===========================================================
1
GBIC
2
RJ45
3
GBIC
4
GBIC
Table 13 describes the fields in this display.
Table 13 Output for display port preference
Field
Port
Preference
See Also
"clear port preference" on page 60
"set port preference" on page 80
Displays configuration and status information for ports.
Syntax —
display port status [port-list]
port-list
information is displayed for all ports.
Defaults — None.
Access — All.
History — Introduced in MSS Version 3.0.
Description
Port number.
Preference setting:
GBIC — The GBIC (fiber) interface is selected as
the active interface.
RJ45 — The RJ-45 (copper) interface is selected
as the active interface.
— List of physical ports. If you do not specify a port list,