Enabling/Disabling Status Reporting - 3Com LANPLEX 6000 User Manual

9-10 C 9: A
HAPTER DMINISTERING
Enabling/Disabling
Status Reporting
Top-Level Menu
system
display
station
ethernet
connectPolicy
path
fddi
tNotify
mac
tokenring
statusReporting
port
bridge
backplane
ip
snmp
analyzer
script
logout
FDDI R
ESOURCES
The statusReporting attribute controls whether a station generates Status
Report Frames (SRFs) to report events and conditions to network
management stations. By default, status reporting is enabled. If you do not
have an SMT management station listening to these event reports or if you
use SNMP to monitor FDDI events on all FDDI end-stations, you can set this
attribute to disabled so that SRFs will not be generated by the station.
To enable or disable status reporting for a station:
1 From the top level of the Administration Console, enter:
fddi station statusReporting
You are prompted for a slot related to the FDDI station. For example, if you
enter slot 1, you could choose the stations related to the FDDI MACs of the
LMM+.
2 Enter the slot(s) related to the FDDI station(s).
You are prompted for a station.
3 Enter the station number.
4 Enter the new statusReporting value (
See the following example:
Select station [1]:
Station 1 - Enter new value (disabled,enabled) [enabled]:
disabled
or
enabled disabled
).