Display Protocol-Vlan Vlan - 3Com 5500-EI PWR Reference Manual

all: Displays the protocol-related information about all ports.
Description
Use the display protocol-vlan interface command to display the protocol information and protocol
indexes configured for specified ports.
Example
# Display protocol information and protocol index configured for GigabitEthernet1/0/1 and
GigabitEthernet1/0/2 ports.
<Sysname> display protocol-vlan interface GigabitEthernet 1/0/1 to GigabitEthernet 1/0/2
Interface: GigabitEthernet1/0/1
VLAN ID
50
80
100
100
Interface: GigabitEthernet1/0/2
VLAN ID
50
80
100
100

display protocol-vlan vlan

Syntax
display protocol-vlan vlan { vlan-id [ to vlan-id ] | all }
View
Any view
Parameter
vlan-id: VLAN ID in the range of 1 to 4094.
to: Specifies a VLAN ID range. Make sure the vlan-id argument to the right of this keyword is larger than
or equal to the argument to the left of this keyword.
all: Specifies to display information about all configured protocol-based VLANs.
Description
Use the display protocol-vlan vlan command to display the protocol information and protocol indexes
configured for specified VLANs.
Related command: display vlan.
Example
# Display the protocol information and protocol indexes configured for VLAN 10 through VLAN 20.
<Sysname> display protocol-vlan vlan 10 to 20
VLAN ID: 10
Protocol-Index Protocol-type
0 ip
1 ip
0
1
Protocol-Index Protocol-type
1 ipx raw
2 at
3
4
ip
ipx ethernetii
snap etype 0x0abc
llc dsap 0xac ssap 0xbd
1-13