Rep 12.12 Entry Roll - Xerox VersaLink B7025 Service Manual

REP 12.12 Entry Roll

Parts List on PL 12.13
Removal
Switch off the electricity to the machine. Refer to
from the customer supply while performing tasks that do not need electricity. Electricity
can cause death or injury. Moving parts can cause injury.
1. Remove the upper chute assembly,
2. Remove the entry roll, Figure 1:
a. Disconnect the spring (1).
b. Remove two E-clips (2).
c. Remove the arm (3).
d. Slide the shaft (4) out of the bearing in the arm.
NOTE: Capture the bearing.
Launch Issue
Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
WARNING
GP 10. Disconnect the power cord
REP 12.13.
Replacement
The replacement is the reverse of the removal procedure.
NOTE: Ensure that the paper guides on the upper chute,
on top of the exit roll assembly.
April 2017
4-71
Figure 1 Roll removal
PL 12.13 Item 4 are not folded back
Repairs and Adjustments
REP 12.12