Omron V460-H User Manual page 89

4 WebLink Configuration
HH
Barcode Programming
Barcode Programming allows you to program the reader by decoding Data Matrix symbols encoded
with configuration commands. You can open Barcode Programming by clicking the Data Matrix icon
between the flash icon and help icon.
Barcode Groups
A barcode group is a collection of two or more compound Data Matrix symbols, like those shown below,
in the Barcode Programming interface.
The names of barcode groups can be edited.
All Data Matrix symbols in a compound symbol (with the exception of Restore Default) should end with a
<A> or <Z> command in the data. Barcode programming will choose <A> when Save Settings to Flash
is unchecked, meaning the reader will keep its original settings when power is cycled. Barcode
programming will choose <Z> when Save Settings to Flash is checked, meaning the reader will have the
settings from the programming code when power is cycled.
Successful Barcode Programming
When a programming barcode is read successfully, WebLink will show a green good read border
HH
around the image and around the code. The output data will say Programming Barcode, and WebLink's
parameters will update to the command setting encoded in the programming barcode (<Ard> – Reset
and Recall Default Parameters Except Communication Settings – in the example shown below).
4-6
V460-H Industrial Handheld DPM Reader User Manual