•
Green Flash – The reader flashes green at the end of a successful read cycle. The green LEDs
remain on for the set time. (0 msec to 655350. The default is 250 msec).
Duplicate Code Timeout – The reader will only read the same code after a certain timeout has
•
passed. (Note that this is only shown when in Continuous Read 1 Output, which can be
changed in Advanced > Read Cycle > Trigger > Mode) (20 msec to 655350).
Timeout After – This is the amount of time the reader is allowed to spend for the entire read
•
cycle, acquiring and processing images until all codes are read. Set this value long enough to be
able to decode in all circumstances, but short enough to prevent the camera from taking longer
than the allowed cycle time of the production line. (20 msec to 655350). (Note that this is only
shown when in Continuous Read, which can be changed in Advanced > Read Cycle > Trigger
> Mode).
V460-H Industrial Handheld DPM Reader User Manual
4 WebLink
Configuration
HH
4-33