Omron V460-H User Manual page 307

5 Reader Parameters
Load Current Settings from Configuration
Database
Definition:
Serial Cmd:
Example:
<K255-,5>
This command phrase loads the configuration settings contained in database index 5 to current, active
configuration settings.
Notes on Symbol Type
• The current DataBar Expanded status does not change if it is configured as Enabled (Stacked) and
the database DataBar Expanded status is Enabled.
• The current DataBar-14 status does not change if it is configured as Enabled (Stacked) and the data-
base DataBar Expanded status is Enabled.
• Data Matrix ECC level is determined by the current settings and not by database settings. Therefore,
the database does not know which ECC level to enable, and has no effect on current Data Matrix ECC
settings.
5-60
Allows the configuration settings contained in a selected database index to
be loaded to current, active configuration settings.
<K255-,index>
V460-H Industrial Handheld DPM Reader User Manual