Omron V460-H User Manual page 77

3 Basic Operation
3-3-6 Configure Symbology and Decode Settings
The Decode area of the Setup view allows you to choose which symbologies (code types) you want to
enable, and allows you to configure the parameters for those symbologies.
See Symbologies for Advanced Decoding Parameters.
The Decode area shown below allows you to select which symbologies the system will search for
during the read cycle. Clicking the check boxes (highlighted in the image below) to the left of the 2D,
1D, and Special symbology categories turns on all symbologies within that category simultaneously.
You can also turn off all symbologies within a category simultaneously by unchecking its corresponding
check box. In the image below, for example, the check box for the Special category is unchecked,
meaning that none of the code types in that category are enabled.
If only some symbologies within a category have been enabled, the check box displays a dash. In the
image below, for example, the check boxes for the 2D and 1D categories display a dash, meaning that
only some of the code types in those categories are enabled.
Click the symbols themselves (indicated in the image below) to bring up a list of all the code types avail-
able in that symbology category.
For example, if you click the Data Matrix symbol above 2D in the Decode area, you will see a list of all
supported 2D code types. You can enable or disable specific code types from the list by clicking them
on or off. In the example below, the green-highlighted code types are enabled and Aztec Code is disabled.
3-36
V460-H Industrial Handheld DPM Reader User Manual