4 WebLink
Configuration
HH
Image Storage
The Image Storage menu shows commands that allow you to control how, when, and where images
captured by the reader are stored.
The Image Storage and Image Storage Location commands shown below are functionally identical to
those described in Application Settings. For example, when you configure the FTP Address command
as shown below, the outcome is the same as it would have been had you used the graphic user interface
accessible from the Application Settings menu.
Application Settings > Image
Storage.
For a detailed list of parameters, refer to
Command parameters can be changed directly from this menu.
Image Storage Menu
Important: Detailed explanations of the following commands and parameters are located in the I/O
Parameters section of the V460-H Handheld Code Reader User Manual.
4-162
V460-H Industrial Handheld DPM Reader User Manual