Omron V460-H User Manual page 327

5 Reader Parameters
Output Format Status
Definition:
Serial Cmd:
Default:
Options:
5-8-10 Output Format Status Disabled
When Output Format Status is set to Disabled, output formatting is globally disabled.
5-8-11 Output Format Status Enabled
When Output Format Status is set to Enabled, output formatting is enabled. However, Format
Assign, Format Insert, and Format Extract must be properly set up as well.
5-80
This is a global enable/disable parameter. In order to use formatting you
must set up the format using the insert and extract commands, and you
must also assign a symbol to format using the Format Assign command.
<K743,output format status>
Disabled
0 = Disabled 1 = Enabled
V460-H Industrial Handheld DPM Reader User Manual