Omron V460-H User Manual page 303

5 Reader Parameters
Configuration Database Status
5-6-2 Index
Usage: Useful for applications that require several different complex reader configurations
to be applied sequentially. Multiple database indexes allow you to concatenate
configuration profiles, and to perform more complex operations than would
be possible with only one set of configuration parameters.
Definition: Determines the specific database index that will be used.
Serial Cmd: <K255,index,exposure,gain,focal distance,pixel binning,symbology,morphology
operator,morphology size,dome light,low angle light,torch light,time of flight>
Options: 1 to 20
5-6-3 Exposure
Serial Cmd: <K255,index,exposure,gain,focal distance,pixel binning,symbology,morphology
operator,morphology size,dome light,low angle light,torch light,time of flight>
Default: 2500
Options: 25 to 100,000
• Note: The Exposure parameter is read-only when the reader is in Continuous Read mode.
5-6-4 Gain
Serial Cmd: <K255,index,exposure,gain,focal distance,pixel binning,symbology,morphology
operator,morphology size,dome light,low angle light,torch light,time of flight>
Default: 0
Options: 0 to 100
5-6-5 Focal Distance
Definition: Provides the focal distance adjustment for the camera.
Any value outside this range will be rejected.
If you attempt to set the Focal distance as the out of range value of your
model, the parameter will be left as-is.
Serial Cmd: <K255,index,exposure,gain,focal distance,pixel binning,symbology,morphology
operator,morphology size,dome light,low angle light,torch light,time of flight>
Default: 400
Options: 0 to 250 mm
0 to 985 (1/100 inch)
5-6-6 Pixel Binning
Serial Cmd: <K255,index,exposure,gain,focal distance,pixel binning,symbology,morphology
operator,morphology size,dome light,low angle light,torch light,time of flight>
Default: Disabled
Options: 0 = Disabled
• Important: Pixel Binning has no effect when the Image Dimension mode is configured as Region of Interest in the
Database Mode command. This is because the Window of Interest camera settings are determined by the software
based on the Region of Interest setup. There is no benefit to Pixel Binning to increase processing speed when ROI is
configured, because the frame size would need to be increased to make Pixel Binning possible.
5-56
1 = Enabled
V460-H Industrial Handheld DPM Reader User Manual