Omron V460-H User Manual page 352

Entering ASCII Characters as Hex Values
Commands that require ASCII text fields, such as Preamble and Postamble commands, can be sent
to the reader as hex values.
Serial Cmd Format: <Knnnh,00-FF>
To enter ASCII fields as hex values (00 to FF), add a lower-case h directly after the command's K
number, and then enter the hex value that corresponds with the desired ASCII character.
Example:
Consider the Postamble command:
Serial Cmd:
Imagine that your application requires the ASCII character > to be the postamble in your symbol
decode output.
The ASCII characters <, >, and
your symbol decode output, enter the Postamble command as follows:
<K142h,,3E>
Note that the "status" field contains only a
"postamble character(s)" field. (See Serial Configuration Command Conventions for a more detailed
explanation of this command shortcut.)
V460-H Industrial Handheld DPM Reader User Manual
<K142,status,postamble character(s)>
,
can only be entered as hex values. So, to make > the postamble in
,
. This is because the only field that is being changed is the
6 Interface Parameters
6
6-21