4 WebLink
Configuration
HH
Beeper
Clicking the Beeper icon allows you to enable and disable the reader's beeper and to control beeper
volume.
Audio Feedback
The Audio Feedback section of the
behavior of the reader's beeper.
Beeper Feedback
Determines which condition causes the reader to beep: Good Read, No Read, Boot and Program, or
All.
Disabled: Will not beep on any event.
•
Good Read: Will beep upon successful decode.
•
4-92
I/O
menu in Advanced Settings allows you to configure the
V460-H Industrial Handheld DPM Reader User Manual