Omron V460-H User Manual page 120

4 WebLink Configuration
HH
Autofocus can be enabled and disabled in the Image Area using the Focus Button in the Device
Control Toolbar, and can be configured in the Acquire section of the Setup view.
While in Continuous mode and Time of Flight is disabled, the reader can enable or disable Autofocus
functionality, allowing it to refocus after a number of no reads. The Focus Button shows an A when
Autofocus is enabled. The focus distance is updated on-the-fly based on the latest refocus settings.
Time of Flight
Time of Flight is a distance sensor that helps with Autofocus. You can enabled and disable Time of
Advanced Settings > Camera Setup or Advanced Acquire Settings.
Flight via
When Time of Flight is enabled, Focus is read-only. When Time of Flight or Auto Exposure and Gain
is enabled, Exposure and Gain are read-only.
The table below shows the Time of Flight and Auto Exposure and Gain parameter setting
combinations.
4-37
V460-H Industrial Handheld DPM Reader User Manual