V460-H Scanning - Omron V460-H User Manual

3 Basic Operation
3-1

V460-H Scanning

3-1-1 Aiming and Decoding
Pick up the V460-H. The aiming dot LEDs turn on automatically by default when a symbol enters the field of view.
1
Ensure that the barcode is centered between the aiming dots.
2
Pull and hold the trigger until the V460-H reads the barcode. The V460-H beeps and vibrates,
and the top and front LEDs flash green. The aiming dots turn off during image acquisition.
3
Release the trigger. If the V460-H has read the barcode, the read cycle is finished. Return to
Step 1 to decode the next barcode. If the V460-H has not read the barcode, the V460-H beeps
and vibrates, and the top LEDs flash red. The aiming dots turn off during image acquisition.
3-2
V460-H Industrial Handheld DPM Reader User Manual