Omron V460-H User Manual page 346

Postamble
6-2-9 Postamble Status
Usage:
Definition:
Serial Cmd:
Default:
Options:
6-2-10 Postamble Characters
Serial Cmd:
Default:
Options:
V460-H Industrial Handheld DPM Reader User Manual
Useful for identifying and controlling incoming data. For example, defining
the postamble as a carriage return and a line feed causes each decoded
message to be displayed on its own line.
Allows the user to enable or disable up to four postamble characters that
can be added to the end of the decoded data.
<K142,status,postamble character(s)>
Enabled
0 = Disabled 1 = Enabled (within any protocol)
<K142,status,postamble character(s)>
^M^J corresponds to: carriage return/line feed.
To enter control characters within a serial command, hold down the control
key while typing the desired character.
Example: <K142,1,CNTL-m CNTL-j> to enter ^M^J.
6 Interface Parameters
6
6-15