Omron V460-H User Manual page 356

Quality Output
6-3-5 Separator
Definition:
Serial Cmd:
Default:
Options:
6-3-6 Decodes per Trigger Status
Definition:
Serial Cmd:
Default:
Options:
V460-H Industrial Handheld DPM Reader User Manual
The separator character separates quality output data from symbol data.
<K704,separator,decodes per trigger status>
,
Any ASCII character.
When this feature is enabled, the reader enters a state where it processes
frames as configured until the end of a read cycle, with or without a successful
symbol decode. When the read cycle ends, the reader outputs any decoded
symbol data along with the decodes per trigger count.
<K704,separator,decodes per trigger status>
0
0 = Disabled 1 = Enabled
6 Interface Parameters
6
6-25