Omron V460-H User Manual page 103

4 WebLink Configuration
HH
Autofocus Off
The Focus Button shows a person in the camera icon when Autofocus is off.
Spot Focus
You can perform a Spot Focus by clicking the Spot Focus button and then clicking the area in the image
where you want to focus.
Optimize
Saves relevant information about the target symbol, allowing the subsequent symbols to be processed
more quickly and consistently.
The reader has three optimization states: un-optimized, optimizing, and optimized.
When the reader is in the un-optimized state and the Optimize button is clicked, the reader enters the
optimizing state until a symbol is decoded or until the Optimize button is clicked again to deactivate the
optimizing state. When a symbol is decoded during the optimizing state, the reader enters the optimized
state.
Note: The Optimize button is only visible when Look for # of Codes in the Cycle section is set to 1.
Auto Button
When the Auto button is clicked, the reader will automatically select the best lighting, exposure/gain, and
distance.
When Auto is disabled, you can configure the lighting settings in the Acquire widget.
4-20
V460-H Industrial Handheld DPM Reader User Manual