Omron V460-H User Manual page 261

5 Reader Parameters
Serial Trigger
Usage:
Definition:
5-2-5 Serial Trigger Character (Delimited)
Usage:
Definition:
Serial Cmd:
Default:
Options:
• Note: Serial Data or Serial Data or External Edge triggering mode must be enabled for Serial Trigger Character to
take effect.
5-14
Allows the user to define the trigger character and delimiters that start
and stop the read cycle.
A serial trigger is considered an online host command and requires the
same command format as all host commands. It must be entered within
angle bracket delimiters < > or, in the case of non-delimited triggers, it must
define individual start and stop characters.
Allows the user to define the trigger character that initiates the read cycle.
A single ASCII host serial trigger character that initiates the read cycle.
A delimited trigger character is one that either starts or ends the read cycle
and is enclosed by delimiters such as < >.
<K201,serial trigger character>
Space bar
Any single ASCII character, including control characters, except NUL (0x00
in hex), an existing host command character, or an on-line protocol character.
Control characters entered on the command line are displayed in the menu
as mnemonic characters.
V460-H Industrial Handheld DPM Reader User Manual