Omron V460-H User Manual page 117

4 WebLink Configuration
HH
Note: When the reader is in Presentation mode and Time of Flight is set to Enabled in (its
default setting) in
process images as soon as an object is placed in front of the reader, and it will continue to do so
until the object is removed. Once a symbol is found in the field of view, the reader will report the
symbol a single time. Acquisition and image processing will continue for as long as the object is
positioned in front of the reader. When the object is removed, acquisition and image processing
will stop. The symbol that was decoded will not be reported again until the object is removed and
placed in front of the reader a second time, or until a different symbol is read during the same
cycle. Time of Flight can be changed in
Triggered Modes
In Triggered mode, the reader starts with a trigger, and the cycle ends when the reader finds the
expected number of codes, or when the read cycle times out.
The cycle time includes the capture and decode times.
4-34
Camera Setup, there is no Timeout. The reader will begin to acquire and
Advanced Settings > Camera Setup.
V460-H Industrial Handheld DPM Reader User Manual