4 WebLink
Configuration
HH
Interpretation of K Command Settings: Custom Ethernet Link Enabled (Default), Transport Layer =
Multicast, Type = Server (Default), Capabilities = Send/Receive (Default).
Send-Only Capabilities
<K166,1,2,0,2>
Interpretation of K Command Settings: Custom Ethernet Link Enabled (Default), Transport Layer =
Multicast, Type = Server (Default), Capabilities = Send.
Client Mode
The following client modes will connect to a Multicast server with IP Address 224.0.1.90 listening on port
5050.
Send/Receive Capabilities
<K166,1,2,1,3, ,224.0.1.90,5050>
Interpretation of K Command Settings: Custom Ethernet Link Enabled (Default), Transport Layer =
Multicast, Type = Client, Capabilities = Send/Receive (Default), IP Address = 224.0.1.90, Port = 5050.
Send-Only Capabilities
<K166,1,2,1,2, ,224.0.1.90, ,5050>
Interpretation of K Command Settings: Custom Ethernet Link Enabled (Default), Transport Layer =
Multicast, Type = Client, Capabilities = Send, IP Address = 224.0.1.90, Port = 5050.
4-144
V460-H Industrial Handheld DPM Reader User Manual