Omron V460-H User Manual page 359

6 Interface Parameters
Read Duration Output
Usage:
Definition:
6-3-9 Read Duration Output Mode
Serial Cmd:
Default:
Options:
This output can measure over 49 days' worth of duration; if exceeded, the "OVERFLOW" message will
be output in place of the duration.
6-3-10 Read Duration Output Separator
Definition:
Serial Cmd:
Default:
Options:
6-28
Useful in evaluating actual read cycle timing results, especially when
initially setting up an application to determine maximum line speed
(obtainable based on spacing between symbols.)
When enabled the duration of the read cycle (in milliseconds) is appended
to the symbol data.
The read duration is the time from the beginning of the read cycle until data
is output.
<K706,status,separator>
Disabled
0 = Disabled 1 = Enabled
User defined character that separates the symbol information from the
Read Duration Output.
<K706,status,separator>
[space character]
Any ASCII character.
V460-H Industrial Handheld DPM Reader User Manual