Omron V460-H User Manual page 140

4 WebLink Configuration
HH
Format Output
By default, the system generates a standard output string containing data from all of the decoded
symbols.
The number of codes, and whether or not to allow duplicates into the string, is controlled from the Cycle
dialog.
The default output order is not controlled. Symbol data is output in the order that the decode algorithm
finds each code in the image.
Basic Output String Formatting
The output dialog in the left panel of the user interface allows the user to make formatting changes to the
output string. The user may do the following operations:
Add Standard or Custom Preamble – Adds standard, or user defined text to the beginning of the output
string when the checkbox is selected.
Select Custom Separator – Appends user defined text between the individual symbol data.
Add Standard or Custom Postamble – Appends standard, or user defined text to the end of the output
string if the checkbox is selected.
All three of the above features work in the same way: select the checkbox and then enter characters in
the field. You can type standard text and/or insert special ASCII characters using the buttons under
"ASCII..." as shown below.
4-57
V460-H Industrial Handheld DPM Reader User Manual