Omron V460-H User Manual page 151

4 WebLink Configuration
HH
Configuration Database
WebLink's Configuration Database is a system that uses two or more unique configurations that are
automatically attempted during a read cycle. It allows for multiple reader changes to be made without
interaction from the user. WebLink
database indexes are working correctly.
The Configuration Database can be used to fine-tune the reader's performance in your application. It can
run multiple decode options in a single read cycle. You can enable Configuration Database and define the
number of configurations in
individually. Configuration database is set up in the Setup tab and tested in the Run tab. Virtually all
Acquire and Decode settings can be individualized per database entry. Clicking the gear icon shows a
view of all database settings.
The Configuration Database is useful in applications where:
More than one symbol type is present;
•
A symbol may require different photometry settings to decode;
•
Symbols are presented at different working distances.
•
Overview of Setup
Process
Use WebLink to:
HH
Define the number of active database indexes, located in the
•
• Configure each of the database indexes by selecting them in the Setup view.
Tips
The indexes are not cycled in Setup mode. Switch to Run mode for read cycle testing.
•
Set the Number of Codes to match the number of barcodes you need to decode.
•
• Index number is only output in Run mode if enabled.
• Save settings to the flash memory of the reader when all the indexes in the Configuration
Database have been defined for the application.
Limitation
• ECC 200 Data Matrix is the only fully supported symbology in the Configuration Database. If a
database entry has Data Matrix disabled, all ECC options will be disabled. If a database entry has
Data Matrix enabled, only ECC 200 will be enabled. Other ECC options can be used with the
Configuration Database only if all database entries leave Data Matrix enabled.
4-68
is used to configure the database settings and verify that all the
HH
Advanced Settings. Configurations are set up individually and saved
Advanced Settings.
V460-H Industrial Handheld DPM Reader User Manual