Omron V460-H User Manual page 83

3 Basic Operation
3-3-8 Run the Application
In the Run view, you can observe the progress of the application as it follows the parameters you have
defined. The right panel of the UI shows Counts for Cycles, Reads, No Reads, and Mismatches, as
well as Rate information for Capture, Decode, Overhead, Total Read, and Trigger Rate, as well as
Output Data. A "filmstrip" below the Image Area shows each image capture with a
mark for a good read and a
3-3-9 Save Settings
The flash icon at the upper right of the WebLink
handheld for reboot. When the current handheld settings match those saved in flash memory, the disk
icon changes from
Save to Flash Memory
Saved to Flash Memory
3-42
red x for a no read.
red to blue.
interface allows you to save current settings to the
HH
V460-H Industrial Handheld DPM Reader User Manual
green check