Omron V460-H User Manual page 221

4 WebLink Configuration
HH
• Send "and/or" commands to the device from a specified endpoint;
Send barcode data to a receiving endpoint (i.e. a client or server);
•
• Handle more than one connecting endpoint connection.
With Custom Ethernet Link functionality, users can configure:
• Transport Layer;
• TCP, UDP, or Multicast;
Message Type;
•
• Server or Client;
The type of data sent and/or received from the device;
•
The endpoint to send and receive data, send only barcode data, receive only commands.
•
Custom Ethernet Link functionality is bound to the reader's command processor as shown in the figure
below. This enables an outside endpoint to still send commands to the device as well as receive data
(commands and barcode) to the receiver.
Server Implementation
In cases where the endpoint is configured as a server, the reader is only able to handle 10 simultaneous
connections for any transport layer. For TCP, the reader will refuse the connection. UDP and Multicast will
simply ignore the connection request due to the connectionless nature of the transport layer.
4-138
V460-H Industrial Handheld DPM Reader User Manual