Omron V460-H User Manual page 373

6 Interface Parameters
Time Since Reset
• Note: Time Since Reset is a read-only command.
Hours
Serial Cmd:
Default:
Hours uses a 16-bit counter that increments every 60 minutes.
Minutes
Serial Cmd:
Default:
Minutes uses a 16-bit counter that increments every 60 seconds.
• Note: Time counts are reset at power-on, but not with an <A> or <Z> command.
6-42
<K407,hours,minutes>
16-bit counter (0 to 65535)
<K407,hours,minutes>
16-bit counter (0 to 60)
V460-H Industrial Handheld DPM Reader User Manual