Connect To Weblink Hh - Omron V460-H User Manual

2-2 Connect to WebLink
2-2-1 WebLink
Operating System Requirements
• Microsoft Windows 10 (64-Bit) or Microsoft Windows 7 (64-Bit)
Note: Using an Embedded OS (Windows CE) and / or an underpowered machine (limited RAM or
limited disk space) is not recommended.
Minimum Hardware and Performance Requirements
• Intel Core i3 Duo Processor or AMD Equivalent
• 2 GB RAM / 128 MB Video RAM
• 1 GB Hard Drive Space
• 32-Bit Color Display
• 4.0 Windows Experience Index
Browser Requirements
• Google Chrome (Recommended)
• Firefox
• Microsoft Edge
• Opera
• Safari (Mac-Only)
Browser Feature Requirements
WebLink requires certain features to be supported by the hosting browser. Support for these features
HH
are checked before WebLink
The following features are required by WebLink
• Web Sockets
• HTML5 Canvas
• HTML5 Audio
2-2-2 Static Connection
• Navigate to Control Panel > Network and Sharing Center on your PC.
• Click Local Area Connection. In the Status dialog, click Properties.
• In the Local Area Connection Properties dialog, select Internet Protocol Version 4 (TCP/IPv4)
and click Properties again. Set your PC to a 192.168.188.X IP address (192.168.188.5, for example).
Note: In Windows 10, the Local Area Connection is referred to as Ethernet.
• Click OK.
• Open a web browser and type the reader's default IP address (http://192.168.188.2) in the web
browser's address bar.
The reader will connect to WebLink
V460-H Industrial Handheld DPM Reader User Manual
System Requirements
HH
loads, and if they are not available, an error message is displayed.
HH
.
HH
2 Installation and Connections
HH
and are checked at startup:
HH
2
2-5