2 Installation and Connections
2-2-3
DHCP Network Connection
Important: Do not use DHCP when PROFINET is enabled as the industrial protocol.
• Plug your handheld into the network adapter.
• Change the handheld from Static to DHCP. The handheld will reboot.
• When the reader is found, note the new IP address that is generated.
• Open a browser and type the new IP address. WebLink
2-2-4
Use the Device Discovery Utility (DDU) to Connect to WebLink
You can also connect to WebLink
automation.omron.com.
Once you have downloaded the Device Discovery Utility .exe file from Omron Microscan's website and
installed the utility, select Device Discovery Utility from the Start menu.
The following screen will appear.
2-6
HH
with Omron Microscan's Device Discovery Utility, available at
HH
V460-H Industrial Handheld DPM Reader User Manual
will load.
HH