Connecting The Mx240 Router To Power - Juniper MX240 Hardware Manual

6. Lift the FPC into place and carefully align the sides of the FPC with the guides inside the card cage.
7. Slide the FPC all the way into the card cage until you feel resistance.
8. Grasp both ejector handles and rotate them clockwise simultaneously until the FPC is fully seated.
Figure 70: Reinstalling an FPC
SEE ALSO
Preventing Electrostatic Discharge Damage to an MX240 Router | 467

Connecting the MX240 Router to Power

IN THIS SECTION
Tools and Parts Required for MX240 Router Grounding and Power Connections | 244
Grounding the MX240 Router | 245
Connecting Power to an AC-Powered MX240 Router with Normal-Capacity Power Supplies | 246
Powering On an AC-Powered MX240 Router | 247
Connecting Power to a DC-Powered MX240 Router with Normal-Capacity Power Supplies | 248
Powering On a DC-Powered MX240 Router with Normal Capacity Power Supplies | 251
Connecting an MX240 AC Power Supply Cord | 253
Connecting an MX240 DC Power Supply Cable | 254
Powering Off the MX240 Router | 256
SC B
SC B
243