Chapter 11 Providing Power To The M10I Router; Connecting Power On An Ac-Powered M10I Router - Juniper M10i Hardware Manual

CHAPTER 11
Providing Power to the M10i Router

Connecting Power on an AC-Powered M10i Router

Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
All manuals and user guides at all-guides.com
Connecting Power on an AC-Powered M10i Router on page 65
Powering On an AC-Powered M10i Router on page 66
Disconnecting Power on an AC-Powered M10i Router on page 67
Connecting Power on an DC-Powered M10i Router on page 67
Powering On a DC-Powered M10i Router on page 69
Disconnecting Power on an DC-Powered M10i Router on page 70
Powering Off an M10i Router on page 71
The AC power cord that plugs into the appliance inlet on the faceplate of each AC power
supply provides direct connection to the external power source.
To connect AC power to the router:
Verify that the power supplies are fully inserted in the chassis and the thumbscrews
1.
on their faceplates are tightened.
For each power supply, plug in the ends of the AC power cord firmly into the appliance
2.
inlet on the power supply faceplate and the external power source receptacle.
M10i AC Power Supply Description on page 25
M10i Router AC Power Supply Specifications on page 191
Preventing Electrostatic Discharge Damage to an M10i Router on page 150
Disconnecting Power on an AC-Powered M10i Router on page 67
General Electrical Safety Guidelines and Electrical Codes for M10i Routers on page 167
65