118814-A Rev. A
Paths are important in a Nautica router. They tell the unit
information about how to reach a specific destination. When a
unit is configured, there are two paths shown automatically; the
LAN01 path and a path called RemotePPP.
LAN01 is the path to the local network and is learned by the unit
automatically. RemotePPP is the path to the ISDN number setup
when using the Installation Assistant (Chapters 1 to 4).
This chapter includes the following sections:
The Path Table
Deleting a Path
Editing the LAN01 Path
Configuring Paths
Chapter 8
page 8-2
page 8-3
page 8-3
8-1