Table of Contents
Advertisement
R
EFERENCE
S
R
T
TATIC
OUTE
ABLES
Static Route Tables are used to restrict access on an account by account basis.
This feature will increase security by restricting access to resources and
facilities on all of your network, parts of the network or to specific IP
addresses only.
To Add a Static Route for a path [click] the ADD button.
To Edit a Static Route for a path [click] the EDIT button.
To Delete a Static Route for a path, [click] on the path to highlight it and
[click] the DELETE button.
REMOTE IP SUBNET
IP FILTER
Note: If no entry is made in these tables, the entire network will be
accessible to all Authenticated connections from the particular path.
If only one address/or filter is entered that will be the limitation of
access.
Note: Filter pairs are treated on a Forward On Match basis and are only
associated with the Account they are configured on while the Session
is active.
To Edit a IP Filter for a path [click] the EDIT button.
IP Address1/Mask
IP Address2/Mask
To Delete a IP Filter for a path, [click] on the path to highlight it and [click]
the DELETE button.
2-24
Type {the IP Address} of the remote unit in
the window.
To Add a IP Filter for a path [click] the ADD
button.
Type { Source IP Address/Subnet Mask}.
Type {Destination IP Address/Subnet Mask}.
Advertisement
Table of Contents
