Multiple Domain Authentication Setup Procedure - Bay Networks Remote Annex User Manual

®
Windows NT steps
Server Tools steps

Multiple Domain Authentication Setup Procedure

Follow these Windows NT
domain authentication:
1. Establish the appropriate trust relationship among domains.
2. Load the Remote Annex Server Tools for Windows NT
trusting domain controller.
3. Define the user(s) in the trusted domain's security accounts
manager database.
®
All Windows NT users who require authorization must use the Remote
Annex Server Tools software to configure these services. Those
definitions are accomplished in the following steps:
1. Add a valid entry(s) in the acp_userinfo file.
2. If the caller requires a dial-up address, add a valid entry(s) in
the acp_dialup file.
The name of the user must be defined in the acp_userinfo and acp_dialup
file in the format:
domain-name\\user-name
For example, a user named Stephen from the Marketing domain would
log on as
Marketing\\Stephen
®
Workgroups , and Windows 95
Remote Annex Server Tools for Windows NT
Chapter 4
®
steps to facilitate support for multiple
®
Windows NT , Windows for
.
®
use this format.
®
User Guide
Using Security Features
® on the
4-3