Installing An M320 Rear Fan Tray; Figure 78: Removing The Rear Fan Tray - Juniper M320 Hardware Manual

Installing an M320 Rear Fan Tray

Copyright © 2010, Juniper Networks, Inc.

Figure 78: Removing the Rear Fan Tray

To install a replacement rear fan tray (see Figure 79 on page 158):
Attach an electrostatic discharge (ESD) grounding strap to your bare wrist, and connect
1.
the strap to one of the ESD points on the chassis.
Grasp the handle with one hand and place the other hand under the fan tray. Insert
2.
the fan tray straight into the chassis.
Tighten the captive screws on the fan tray faceplate to secure it in the chassis, using
3.
a Phillips (+) screwdriver, number 2.
Chapter 13: Replacing the M320 Router Hardware Components
157