Installing An M320 Rear Fan Tray; Figure 83: Removing The Rear Fan Tray - Juniper M320 Hardware Manual

Installing an M320 Rear Fan Tray

Copyright © 2015, Juniper Networks, Inc.
WARNING: To avoid injury, keep tools and your fingers away from the fans
as you slide the fan tray out of the chassis. The fans might still be spinning.
When the fans stop spinning, place one hand under the fan tray to support it, and pull
4.
the fan tray completely out of the chassis.

Figure 83: Removing the Rear Fan Tray

To install a replacement rear fan tray (see
Attach an electrostatic discharge (ESD) grounding strap to your bare wrist, and connect
1.
the strap to one of the ESD points on the chassis.
Grasp the handle with one hand and place the other hand under the fan tray. Insert
2.
the fan tray straight into the chassis.
Chapter 25: Replacing Cooling System Components
Figure 84 on page 212):
211